精品久久久久国产免费-中国丰满人妻videoshd-丰满多毛少妇做爰视频-三级4级全黄60分钟-性生交片免费无码看人

您好,歡迎來到泊頭市建新鑄造量具有限責任公司官方網站,如有任何疑問請撥打全國統一服務熱線400-050-7100
行業信息
您當前的位置: 首頁>>新聞中心>>行業信息

量具量儀中英文對照匯總

2016/11/7 量具,量儀 建新鑄造
本文導讀:1.刀口型直尺:knife,straigjht,edge,2.刀口尺:,knife,straigjht,edge,3.三棱尺three,edges,straigjht,edge,4.四棱尺four,edges,straigjht,edge5.條式和框式水平儀

1.刀口型直尺:knife straigjht edge
2.刀口尺: knife straigjht edge
3.三棱尺three edges straigjht edge
4.四棱尺four edges straigjht edge
5.條式和框式水平儀
bar form and square levels
6.合像水平儀 imaging level meter
7鑄鐵平板 cast iron surface plate
8.巖石平板 granite surface plate
9.鑄鐵平尺cast iron straigjht edge
10.鋼平尺和巖石平尺
steel and granite straigjht edge
11.圓度儀 roundness measuring instrument
12.電子水平儀electronic level meter
13.表面粗糙度比較樣塊鑄造表面 roughness comparison specimens cast surface
14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面
roughness comparison specimens-ground,turned,bored,milled,shape and planed
15.表面粗糙度比較樣塊電火花加工表面
roughness comparison specimens spark-erostion machining surfaces
16.表面粗糙度比較樣塊拋光加工表面
roughness comparison specimens pollshed surfaces
17.接觸式儀器的標稱特性
18.輪廓profiles
19.軌跡輪廓 traced profile
20.基準輪廓 reference profile
21.總輪廓 total profile
22.原始輪廓 primary profile
23.殘余輪廓residual profile
24.觸針式儀器stylus instrument
25.感應位移數字存儲觸針式量儀displacement sensitive,digitally storing stylus instrument
26.觸針式儀器的部件stylus instrument components
27.測量環measurement loop
28.導向基準renfence guide
29.驅動器drive unit
30.測頭(傳感器)probe(pick-up)
31.拾取單元tracing element
32.針尖stylus tip
33.轉換器transducer
34.放大器amplifier
35.模/數轉換器analog-to-digital converter
36.數據輸入data input
37.數據輸出data output
38.輪廓濾波和評定profile filtering and evaluation
39.輪廓記錄器profile recorder
40.儀器的計量特性metrological characteristics of the instrument
41.靜測力的變化change of static measuring force
42.靜態測力 static measuring force
43.動態測量力 dynamic measuring force
44.滯后hysteresis
45.測頭的測量范圍 transmission function for the sine waves
46.儀器的測量范圍measuring range of the instrument
47.模數轉換器的量化步距quantization step of the ADC
48.儀器分辨力 instrument resolution
49.量程分辨力比range-to-resolution ratio
50.測頭線性偏差probe linearity deviation
51.短波傳輸界限short-wave transmission limitation
52.輪廓垂直成分傳輸 vertical profile component transmission
53表面粗糙度比較樣塊拋丸、噴砂加工表面
roughness comparison specimens shot blasted and blasted surfaces
54產品結構幾何量計術規范(GPS)geometrical product specifications(GPS)
55表面結構 surface texture
56接觸式儀器的標稱特性 nominal characteristics of contact instruments
57公法線千分尺micrometer for mearsuring root tangent lenghths of gear teeth
58****允許誤差 maximum permissible error
59圓柱直齒漸開線花鍵量規 gauges for straight cylindrical involute splines
60齒厚游標卡尺 Gear tooth vernier
calipers
61齒輪漸開線樣板the involute master of gear
62齒輪螺旋線樣板 the helix master of gear
63矩形花鍵量規 gauges for straight –sided splines
64測量蝸桿 master worm
65萬能測齒儀 universal gear measuring instrument
66萬能漸開線檢查儀universal involute measuring instrument
67齒輪齒距測量儀gear circular pictch measuring instrument
68萬能齒輪測量機 Universal gear measuring machine
69齒輪螺旋線測量儀gear helix measuring instrument
70便攜式齒輪齒距測量儀 manual gear circular pitch measuring instrument
71便攜式齒輪基節測量儀manual gear base pitch measuring instrument
72立式滾刀測量儀vertical hob measuring instrument
73齒輪雙面嚙合綜合測量儀Gear dual-flank measuring instrument
74齒輪單面嚙合整體誤差測量儀Gear single-flank meshing integrated error measuring instrument
75梯形螺紋量規 gauges for metric trapezoidal screw threads
76工作螺紋量規work gauges for metric trapezoidal screw threads
77校對螺紋量規check gauges for metric trapezoidal screw threads
78.梯形螺紋量規型式與尺寸 Types and dimensions of metric trapezoidal screw threads
79.普通螺紋量規型式與尺寸 Types and dimensions of gauges purpose screw threads
80.非螺紋密封的管螺紋量規 Gauges for pipe threads prcessure-tight joints are not made on the threads
81.螺紋千分尺
Screw thread micrometer
82.****允許誤差 maximum permissible error
83.間隙螺紋量規 Clearance screw gauge
84.量針
Bar gauge
85.螺紋樣板 Screw thread template
86.用螺紋密封的管螺紋量規
Gauges for pipe threads where pressure-tight joints are made on the threads
87.刀具預調測量儀 精度
Accuracy of the presetting instrument
88.薄膜式氣動量儀
Membrane type pneumatic measuring instrument
89.光柵線位移測量系統
Grating linear displacement measuring system
90.光柵角位移測量系統
Grating angular displacement measuring system
91.磁柵線位移測量系統
Magnet-grid linear displacement measuring system
92.量塊附件
Accessories for gauge blocks
93.V形架
Vee blocks
94.比較儀座
Comparator stand
95.磁性表座
Magnetic stand
96.萬能表座
Universal stand for dial indicator

上一篇文章:鑄鐵平臺設置加強筋有什么作用..【2016/10/24】
下一篇文章:鑄造相關知識..【2016/11/14】
主站蜘蛛池模板: 99久久久无码国产精品6| 国产婷婷在线精品综合| 18禁无遮挡啪啪无码网站| 亚洲浮力影院久久久久久| 国产精品免费大片| 色翁荡熄又大又硬又粗又视频| 欧美老熟妇乱子伦视频| 国产精品久久久亚洲| 国产v亚洲v天堂无码久久久 | 强被迫伦姧高潮无码bd电影| 久久精品国产精品| 中文字幕乱码中文乱码51精品| 国产精品一区二区av不卡| 黑人巨大精品欧美一区二区免费 | 7777色鬼xxxx欧美色妇| 无码国产69精品久久久孕妇| 业余 自由 性别 成熟偷窥| 国精一二二产品无人区免费应用| 成年男人午夜片| 亚洲成成熟女人专区| 女人被黑人狂躁c到高潮小说 | 久久午夜无码鲁丝片| 337p人体粉嫩胞高清视频| 人人人妻人人人妻人人人| 欧美无遮挡很黄裸交视频| 日本肉体xxxx裸体137大胆| 欧美疯狂做受xxxxx高潮| 国产乱人激情h在线观看| 大又大粗又爽又黄少妇毛片| 国产亚洲精品久久久久久无几年桃| av无码a在线观看| 成人免费午夜a大片app| 国产永久免费观看的黄网站| 极品少妇小泬50pthepon| 少妇愉情理伦片bd| 国产爆乳无码视频在线观看3| 欧美大荫蒂毛茸茸视频| 久久久免费精品re6| 欧美性大战久久久久久| 国产自偷自偷免费一区| 十八岁以下禁止观看黄下载链接|